How to Replace a UPVC Window Handle

If your upvc window handle is broken, don't panic. Replacing a window handle made from upvc is an easy task and can be completed in a matter of a few steps.

It doesn't matter if you have an in-line or a cranked espagnolette window handle they all have a square spindle that protrudes from the back plate. The spindle is fitted into the locking device.

Identify the type and size of the lock and handle

Over time, window handles and locks could be damaged or lose their functionality. It is possible to repair this issue without replacing the entire uPVC unit. One of the first things to do is determine the type of handle and lock you have to determine what parts will be required for replacement.

You can identify the type of handle by examining the base. A screw or pin will hold the handle to its base. If the screw is gone it could indicate that the handle has separated from the base section. If the handle has split internally and doesn't hold the spindle any longer It could also be a sign that the handle must be replaced.

There are a variety of different types of uPVC window handles however the most popular is the Espag handle. They are usually secured by two bolts and feature spindles that are connected to the lock mechanism inside the window frame. These handles are commonly used on tilt and turn uPVC windows.

Another type of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, but they are a little further from the frame. These handles are usually used on older uPVC windows.

There are also Venetian window handles that are similar to the Espag handle, but they have flat bases that allow them to be fitted in a flush position with the frame. These handles are a great option for homeowners who are looking for an elegant handle that will be a perfect match with their uPVC frames. These handles come in a variety of colors that can match any decor.

Measure the spindle

Before purchasing a new handle, it's important to know how the old one is connected. This will tell you whether it's too tight or too loose and also if it can fit into the window frame. This can be done by identifying the handle type and measuring the spindle. The spindle is a metal shaft that connects the handle to the lock within the window frame. It's available in different sizes with the current industry standard being 8mm. Older handles could have a cross-section of 9mm, so you'll have to measure your old handle to ensure you get the right size replacement.

There are several types of window handles, but the most popular are inline Espagnolette and Cockspur handles. These handles are operated by an locking mechanism within the window, using shootbolt rods that lock the window when it's closed. They are secured with pins or screws based on the kind of handle you have.

You can purchase Upvc handles replacement on the internet or in many DIY stores. They come in a range of finishes and are suitable for both new or replacement windows. They can also be key-locking or fire-escape non-locking for extra security.

To take off your old handle simply open the door and loosen the screws that hold it in place. Keep the screws in a container to protect them from damage. Once the screws are removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to the end. This will give you the necessary information to purchase the correct replacement. The spindle of the handle is the metal shaft that connects it to the lock gearbox in the window frame.

Remove the handle that was previously used

Switching the handle of a uPVC window handle is an easy task and usually takes no more than five minutes using the appropriate tools. The first thing to do is determine the kind and size of the lock or handle. This will allow you to choose the right replacement window handle. After that, weighing the spindle will ensure that the new handle is a suitable to the existing one. In the end, you'll need remove the handle you have been using and replace it with the new one.

The majority of uPVC handles have inline Espagnolette handles. These handles have central spindles that slot into the locking mechanism of the window. These are generally easy to remove, but you may require force when they're stuck. There are typically two screws that keep the handle in place which can be removed using either pliers or a screwdriver. Depending on the kind of handle, you may be required to take out any pins that are holding it in place.

After you have removed the screws, you can remove the old handle. The top of the base plate will be visible when the handle is in an open position, showing two more screws that can be removed. There's also an unimportant silver or color sticker that must be removed if it's still in place.

Utilizing the screws from the handle, you can screw the new handle into place. Make sure the handle is in an open or locked position, then align the screw holes with the holes on the window. After you have done this, replace the caps on the screws. Test the new handle. It's simple to replace a uPVC handle, but you need to make it right.

Replace the handle with a new one.

It's time to put in your new handle if you have successfully removed the old handle from the frame. Begin by locating and taking off the screw covers with your screwdriver. After they've been removed, put them in a safe place and proceed to the next step.

Then screw the spindle into by aligning it with the existing hole. Make sure that the holes on the handle with the ones in the window frame. Use a screw that is the same size as the previous.

The uPVC Espag handle comes equipped with a spindle of 7mm square which turns the lock mechanism of the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) come with an extended nose that locks over the frame's outer or transom bar cross members and are commonly found in older uPVC windows.

Once the new handle has been put installed, it is important to ensure that it operates properly by locking and unlocking the window several times. If all goes according to plan, residential the replacement uPVC handle should be securely fixed and operating smoothly. If not, the steps above will help you diagnose any issues and resolve it quickly. If you're having trouble with your uPVC handle or have any other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are able to repair or replace different window handles and frames. This makes us an excellent option for double-glazing.

Test the new handle

Over time, uPVC handles become damaged and worn out. This can make them less secure and effective and therefore it is important to replace them as soon as you can. This is also a good option to consider when you upgrade your windows. Switching your lock mechanism and handle will help to maintain your new windows' integrity.

When it is to uPVC window handles, there are a variety of different styles. Some are secured by pins or screws while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, therefore it's important to know what kind you have before you start working on it.

The most popular type of window handle is the espag. They are typically used on newer uPVC Windows. The spindle extends from the handle into the lock gearbox and activates the locking system when you open the window. They are also easy to take off however, you must be careful not to damage the mechanism or the handle while taking them off.

Cockspur handles are another alternative for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates in the shape of wedges on the frame. This type of handle can be more difficult to repair than others, but is still a good option for homes with a lot of windows.

Venetian window handles are secured with two bolts. They have a slim projection from the frame, unlike the Espag handle. These handles are great when you want to have a flush handle that blends in with uPVC window frames. They're an excellent choice for commercial and residential buildings.