UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the right tools. But it's essential to know the handle's type and spindle length before buying an alternative.

Older uPVC window handles have a spur that protrudes and locks on a cockspur wedge striker. These can be either left or right-handed and must be to match when replacing.

What kind of lock and handle do I need?

There are many kinds of window handles made from upvc and locks, each with their distinct advantages and functions. The type of handle that you choose will determine if your locking mechanism is efficient and if it's easy to open the windows. With time and regular use the upvc handles that are on your windows can get worn out and damaged. This makes them less secure and effective. In some cases they may even fall off completely. If you notice that your upvc window handles have fallen off, it is essential to repair them as quickly as you can. This will help prevent potential break-ins and keep your home safe.

It's a task that almost anyone can do. You'll require a few basic tools, but with the appropriate knowledge, it's an easy task that will only take a few minutes. It is important to know the type of handle or lock that you have on your window. This will help you select the appropriate replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They have a flat design and have a latch that connects to the locking mechanism on the window handle replacement frame when it is turned. Inline upvc handles feature an elongated spindle that runs through middle of the handle to the window frame in order to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are attached to the window frame by one screw, and are less secure than other types of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be turned for opening the window, and then lowered into the window to ventilate. They typically feature a 7mm spindle on the side of the handle. They are available in both left and right-handed versions.

It is important to measure the size of the spindle when purchasing a new upvc handles. Not all are the exact same size. To determine the length of your upvc handle, simply drop something in the middle of the hole and measure how far down it goes before meeting an obstruction. This is the maximum size of spindle that will fit in your windows.

What is a spindle?

uPVC window handles work similarly to doors. By turning the handle, you will be able to activate a latch inside the frame. The latch opens the window, so it can be closed and opened. However, in some cases, handles can be damaged, especially if they are regularly used or exposed to harsh weather conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it properly.

There are a variety of uPVC handles that are available, comprising Espag, Cockspur and Spaded handles. They are designed to fit into the uPVC frames in a variety of ways. Each handle utilizes a specific spindle to secure the mechanism to the window. This is why it is crucial to know what type of handle is installed on your uPVC window so you can get the correct replacement.

The base section of the handle will tell the type of uPVC it is. A snap-in cover is over the screw that holds the handle's base in place. Remove this and then you should be able see the second screw located at the opposite end of the base section of the handle. After both screws are removed then you should be able to take the handle out of the uPVC.

After taking off the uPVC handle, remove it from the locking mechanism. Take careful note of the length of the spindle since you'll need to make sure that you purchase a replacement that has the same length as your original handle and locking mechanism.

The most common issue with uPVC window handle problems is that the spindle gets worn out and cannot longer function properly with the locking mechanism. This can be due to damage caused by constant use or a loosening of the locking mechanism, or even rust over time. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can be damaged or broken over time. It is important to fix them as quickly as you can to ensure your security. It is easy to replace a worn or damaged handle. The task can be completed in under a minute without the need for any special tools.

To remove the handle, you first need to remove the screw located at the bottom of the handle. Once this is removed the handle can then be pulled away from the base. There is another screw located at the bottom of the handle's base and it is able to be removed as well. Once these two screws are removed, the handle will be removed from the window's base.

After removing the handle and align the fixing holes of the new handle with the existing holes in the window frame. If there is a cap or sticker on the new handle, take it off it if needed and screw the handle in the appropriate position. It is crucial to verify that the handle is working after it has been installed. Turn the handle and UPVC Window Handle Replacement ensure that the lock mechanism is in place.

Espag handles feature a spindle which protrudes out of the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom bar crossmember.

Once you have installed the new handle, insert the spindle into the window lock and tighten it. Once the handle is firmly fixed in place and secured, replace the snap-in cover and the screw cap (if appropriate). Now that the handle is in use, simply open and close the window a few times to make sure it is working properly and securely.

How do I install the new handle?

It's not difficult to alter the handle on your uPVC windows. The procedure is simple. All you need is a screwdriver, and a little bit of patience. First, ensure that the handle that you are replacing is unlocked. Then, remove any visible screws. You can also replace them using screw caps. After removing the handle and you are ready to take an outline of the length of the spindle that protrudes from the back of the handle. This is important as it will determine the kind of handle you'll require to purchase.

Espagnolette handles are the most common type of handle used on uPVC windows. They have a spindle which runs through the handle and acts as a locking mechanism inside the frame of the window. Once the handle is turned it opens the latch on the window, allowing it to open. With time and regular use, espagnolette handles could be damaged or damaged, making it necessary to locate an alternative.

Cadenza handles are a kind of uPVC handle that is typically used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism inside the window. They are generally more secure than espagnolette handles since they are only accessible from the inside. They can be replaced using the same procedure as espagnolette handles, however you will need to ensure that the new handle has an angled blade, as opposed to a flat one.

After you have picked the correct handle, you can align the new handle with existing screw holes before screwing it into place. Then, put the screws on and test your new handle. This is done by moving the handle from locked to the unlocked position and vice versa a few times. If you experience any issues, it could be beneficial to speak with a professional to see if they are able to help resolve the problem. They will often be able to guide you on the best solution to solve the issue in a quick and efficient way.