Replacement Handles For UPVC Windows

UPVC window handles are available in various styles, however they all have the same locking mechanism. To replace a uPVC window handle, you must remove the top screw at the base of the handle. This will reveal two screws.

Then, take measurements of the spindle to make sure the new handle is suitable. It's important to know what kind of handle you have because there are a variety of sizes.

Inline Espagnolette Handles

Espagnolette handles are found on most modern double glazed windows and feature multi-point locks which provide greater security. They work by using the 7mm square spindle on the back of the handle that connects with a gearbox on the inside of the window frame, which turns multi-locks when turned. They are available in a range of styles, including cockspur keys, inline and locking handles.

Our uPVC replacement handle kits are designed to make it easy to replace a damaged or broken espagnolette window handle. These uPVC handle sets are packaged with a selection of spindle lengths that will fit the majority of applications. They also come with all the fixing screws needed to fix them. These handles are also available with key-plugs which allow them to be changed from the standard open/closed handles to egress or fire escape non locking handles (if used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another option is our Yale Sparta 2 Inline Espag Handle that has been designed for minimal aesthetic intrusion with a lower base height. It is part of our suited range of hardware and is available in a variety of finishes that all meet the specifications of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for durability and are suitable for use with acidic woods and coastal environments. They are compatible with cylinder-immobiliser inserts for key-locking where required.

Cockspur Handles

Cockspur handles, typically found on older uPVC or aluminium doors and windows They are a simple latch-and-catch arrangement. The handle nose is attached to or put into the catch, which is a wedge block of plastic, which is attached to the window frame. The wedges are available in a variety of sizes, so it's essential to know the size of step you need prior to buying an alternative handle. As a general rule, uPVC windows tend to have a step size of 21mm and aluminium frames generally come with a handle step of 9mm.

The cockspur handle is lockable with a key, providing security to your home. The lock is installed inside the handle using an appropriate spindle that fits in the hole of the handle (also called a backset). The spindle measures 7mm square and can be used to open or close the window.

If you are replacing a cockspur handle, it is worth ensuring that it has the same height for steps as the original. Usually, this is measured from the base of the spur on the handle to the underside of the handle's nose. This measurement is often referred to as the backset or stack height and it is crucial that you know this before you purchase the handle.

Cockspur handles can be straight or universal or cranked. They are available in left or right handed versions. This is to allow the handles to be positioned on windows that open from the left or right, and to give the user a better access to the window.

Find out if your window requires a restrictor. This is designed to prevent the handle from opening past a certain point. These are usually required for high-rise flats or commercial buildings for security reasons. The majority of domestic homes don't need them.

There are many different styles and colors of the cockspur handle, such as stainless steel with brushed finishes and white uPVC choices. Selecting the right one for your windows will be based on your personal preferences and style, and how you would like the window to function.

Handles that tilt and turn

The UK is home to a wide range of double glazed windows replacement-glazed windows that have tilt and turn handles. They can be found on both timber and upvc windows. The handle is usually set at 90 degrees, but it can also be rotated in 180 degrees. This allows the window to be fully opened to the room and can also be lowered to allow for ventilation. The handle is locked in this position, requiring a key to unlock the handle when needed to open it.

This kind of handle can be easily changed, since it only has one large handle, not a number of smaller ones. This improves the overall appearance of the handle and is more in keeping with the modern minimalistic design trends. In addition to this they are much simpler to clean than casement windows, as the window opens to the inside and Replacement Handles For UPVC Windows can be cleaned on both sides.

Another benefit of tilt and turn windows is that they are 4 - 8 times stronger than casement windows. This makes them ideal for larger windows as well as doors. The frames also have a steel core which increases the durability and strength.

The tilt and turn mechanism is also safer than casement windows, Replacement Handles For UPVC Windows since the handle can be locked at any angle. This is particularly important in areas that have children, as it prevents children from opening a window.

Many homes opt for tilt and turn windows due to the fact that they can be used in different ways. They can be opened horizontally, just like windows that are regular, lowered down in the hopper style for ventilation or tilted inwards to allow for cleaning and maintenance. This is an excellent option for those who wish to increase airflow and reduce noise in their home. They are also easy to clean and maintain, because the glass is easily removed. They are available in various sizes and colors. These windows are suitable for any home, and complement both modern and traditional styles.

Crank Handles

Crank handles are simple to operate and offer a great view of the outside without obscuring the glass. They are typically employed in casement windows, which hinge on the sides or windows with awnings. They feature an mechanism that is similar to the window bar and linkage arm that supports the window sash, which opens or closes by cranking the handle in the clockwise direction. Unlike other types of handles that are geared towards windows, a crank window's mechanism and handle are usually subject to significant wear and tear, which can cause the gears to strip and the handle to stop working or fall off the operator shaft. Regularly inspecting the handle and the mechanism for operating it will ensure they remain in good condition for many years.

A crank handle is composed of a mechanical shaft that rotates perpendicularly and is attached to an arm. The arm is turned in a circular direction by grasping it and rotating it, similar to how you operate a sharpener. In certain instances the handle could be operated via a leg.

The base of the crank handle is hollow. This hole allows the handle to be connected to machinery and equipment. The handle's arm also includes a connecting rod which converts the circular motion of the handle into rotary or reciprocating motion to operate equipment and machines.

In addition to adjusting equipment and machinery, crank handles are commonly used on boats to aid them to load trailers. They are typically made from stainless steel, which is resistant against corrosion in marine environments. The majority of boat crank handles have been powder coated to protect against damage and make them easier for cleaning.

If the crank handle on your window has stopped functioning or isn't opening the window, it might be time to replace it. Before doing so you should look for the trim mounting screws within the window frame's track for screen. If there aren't any, you can try to loosen the cover with a stiff putty knife by sliding it between the window jamb and the frame and pulling it. If this doesn't work, you can remove it and access the crank by unbolting screws in the window frame.