Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window to access the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure they remain in place.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle getting worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. You'll first need to close the window replacement near me and do a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be applied. When it comes to uPVC repair, it is important to avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze It could be hinges that are at fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become disaligned as a result of wear, causing a gap between the frame and sash. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock may also become misaligned. This happens on the hinge's side, and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common reason for draughts is window doctor seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.