Choosing uPVC Replacement Window Handles

Many customers agree that replacement handles made of upvc are easy to install and feel great. However, it is important to realize that the type of handle you pick should be appropriate for your window.

The height of the step is the most important factor. This is the distance between the handle and the frame or base. Other considerations include locking mechanisms and designs.

Replacement parts

You can buy a variety of replacement upvc handles. They come in many different colours and styles so there is sure to be something that fits your windows. It's easy to buy on impulse especially if the handle fails, so it's best to look over the details prior to committing to buying a new one. First, you must be aware of the type of upvc handles you have and what the differences between them. The table below outlines the most common handles to help you choose the one that is suitable for your windows made of upvc.

Most double-glazed windows today have handles that are epag. They are usually attached to the frame by two screws that are screwed into the frame from both sides, above and below.

The spindle bar in the back may be of different sizes, and will determine whether they are left-handed or right-handed. It's important to take the measurements of the handle you currently must ensure that you order the appropriate replacement.

The arm is fixed to the frame with two bolts, much like the Espag handle. However, the handle has a low projection so that it won't poke your blinds. This is a good option for blinds on your windows made of upvc and want to ensure that the handle will blend in with them.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that sits on the frame of the window. This kind of handle can be found on older wooden and upvc windows.

On casement windows, tilt and turn handles can be operated by turning the handle or pressing the top of the window. This allows you to open the window glass replacement from inside and clean it from outside without the need to climb a ladder or step across the fence. They are also a great alternative for those with limited mobility. They are an excellent method to improve security and accessibility within the home.

Tips and suggestions and

Many people will need to replace their uPVC window handles at some time. It's important to have some tips and tricks that can help you make the task easier.

Find out what kind of handle is in your home. Based on the type of handle and the locking mechanism, uPVC Replacement Window Handles it may be necessary to replace the handle and lock. If the roller cams and shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them, along with the handle.

Fortunately, the majority of uPVC handles conform to industry standards and are alike. This makes replacing them an simple task. The first step is to remove the screw covers from the handles, which are typically the pozi-drive screws. After the screws have been removed you will be able to dismantle the handle.

When you have the handle split it is a good idea to make note of how much of the spindle extends from the base of the handle. This will help you to measure the length of the spindle for a replacement handle. Simply take note of the length the square peg extends from the bottom of the handle.

This is especially important for inline uPVC window handles as they'll always be straight and can only open either left or right, and will not operate in the middle. It is a good idea if you're not sure of the kind of handle you have at your home, to borrow a handle to see how it works.

You can also determine the handedness of a uPVC window by observing the way the handle turns when it is in use. Handed handles can turn either clockwise or anti-clockwise. If you're not sure, you can always have someone else open the window with the handle, and figure out how it functions in this manner.

Measure the spindle

Choosing the correct replacement handle for your windows could be a bit difficult since not all handles are identical in size. The spindle controls the locking mechanism inside the window. It is essential to ensure that when installing a new handle, you measure the length of the spindle precisely to ensure that it fits. There are a variety of types of uPVC window handles, and they operate in different ways so it is essential that you know which kind of handle you are using and the type of locking system.

The spindle on the espag handle extends from the handle's rear, and is connected to the lock gearbox inside the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by a "nose", which closes over a wedge shaped striker block. They are also easy to use and can be locked using keys. These handles can be somewhat more difficult to find replacements for because they aren't as well-known as the handles with a espagnolette.

If you have a tilt and turn uPVC window then you will need to get a special kind of uPVC replacement handle that has an additional locking mechanism. The handle can tilt the window, and allow it to rotate back and forth to fully open it. It is essential to select an opening handle that has a spindle that is at least 55mm to be able to reach the window frame.

You can use the same method to take off and replace this kind of uPVC handle, however you must be careful when unscrewing the old one. It may be necessary to open the window a bit wider than normal to reach both screws that hold it to the frame. After you have installed your new uPVC handles and confirmed that they are in the correct position, you can tighten up the screws and test to ensure the lock is working properly.

Replace the handle with the new one.

If you have the proper replacement handle, it should simply screw into the correct position. It will require a screwdriver and an electric one could be a lot easier. When screwing, it is crucial not to over tighten the screws because this could cause the handle to crack or warp.

The second step in fitting the new handle is to install the spindle. This is the part that runs through the handle and controls the locking mechanism inside the window. It is vital that it is fitted correctly, as it will ensure that the window can be opened and closed securely.

There are a myriad of different kinds of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are like inline handles but have a curved design that can be useful for hard-to-reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows for operating the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. In the UK they are often called "Bay Windows".

If your uPVC window handle is broken it can be very frustrating. There is no need to change the entire uPVC windows because of a broken window handle. There are a few easy steps you can take to repair or replace a damaged uPVC handle.

By identifying the kind of window you have, calculating the length of the spindle, and then purchasing a replacement handle you can quickly repair your broken window handle. When working with tools and windows it is crucial to prioritize safety. However, this is a relatively simple task. It can make all the difference between having a secure and secure home or an insecure easily opened window! If you have any questions or want to talk with a professional regarding replacing your window handle, contact Bridgewater Glass. Our team is knowledgeable and experienced to help you with any problem.