Choosing uPVC replacement window Handle Window Handles

Almost all customers agree that these replacement window handles made of upvc are easy to install and feel like good quality. It is important to be aware that the handle you pick for your window should be suitable for the window.

The primary factor is the step height which is the distance from the nose of the handle to the frame or base. Other considerations include lockable designs and mechanisms.

Replacement parts

You can buy a variety of replacement handles made of upvc. They come in many different colours and styles so there's bound to be something that will fit your existing windows. It's easy to purchase a product on impulse, especially when the handle is damaged. It is therefore advisable to check a few things before buying the replacement. First, you need to be aware of the type of upvc handles you have and what the differences are between them. The table below lists the most common handles to help you identify the one that will fit your upvc windows.

Most double-glazed windows today come with handles for epag. They are usually affixed to the frame with two screws that are screwed in from both above and below.

They come with a spindle bar on the back which can be of a variety sizes. This will determine how they work (either left or right handed). This is why it's important to determine the handle size to ensure that you're ordering the correct replacement.

Usually fixed with two bolts much like the Espag handle but they have a lower projection from the frame which means that the handle will not poke through your blinds. This is a great option when you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge which sits on the window frame. This type of handle is available on some older wooden and Upvc windows.

Tilt and turn handles are usually found on casement windows and can be operated by turning the handle or pushing on the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or walk across the fence. These are also an excellent option for replacement window handle those who have mobility issues, and can improve security and access in the home.

Tips and hints

There are a variety of different types of uPVC window handles, and a lot of people will need to replace them at some point. It's important to have some tips and tricks that can help you make the task easier.

The first step is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it may be necessary to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing, you will need to change them as well as the handle itself.

Thankfully, most uPVC handles are identical and follow industry standard sizes, making replacing them a relatively simple process. First, take off the screw covers on the handles. They are typically pozidrive screws. Once the screw covers are removed you will be able to remove the handle.

If you've got the handle split from the handle, it's a good idea to make a note of how much of the spindle is protruding from the base of the handle. This will help you measure the length of the spindle to determine the replacement handle. Simply measure the length the peg is sticking from the bottom of the handle.

This is especially important for inline uPVC handles for windows, since they are always straight and will only open left or right. They will not work in the middle. If you're not sure of the kind of handle you have at home, replacement Window handle it can be a good idea to take an existing handle from your neighbour's house and see how it operates to get an idea.

You can also determine the hands of a uPVC window by observing how the handle spins when it is in use. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're not sure you are, ask someone else to open the window using the handle and observe how it works.

Take a measurement of the spindle

It can be difficult to pick the appropriate replacement double glazing windows handle for your window because there aren't all handles that have the same size. The spindle is the part that is the mechanism that locks the window. It is essential that when fitting a new handle it is measured to the spindle length accurately to ensure that it fits. There are many different kinds of uPVC window handles and they operate in different ways therefore it is crucial that you know what type of handle you have and the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox, and opens the window. They are used on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are equipped with an "nose" that is closed over a wedge-shaped striker block on the frame and they are typically found on older double-glazed uPVC windows. They are also fairly easy to install and can be locked with keys. These handles can be slightly more difficult to find replacements for because they aren't as popular as the handles that have a swivel.

If you own a tilt-and-turn uPVC, you will require a new handle that has an alternative locking system. It can tilt the window open but also rotate it around to open it fully. It is essential to ensure that the handle you choose has a length of at least 55mm or it won't be able to reach into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to be cautious when unscrewing it. You may have to open the window a little larger than usual to ensure you reach both screws that are fixing it to the frame. After you have installed your new uPVC handles and checked that they are in the proper position and tighten the screw covers and check to make sure the lock is working correctly.

Fit the new handle

Once you have the correct replacement handle, it will simply screw into place. This will require a screwdriver, but could be simpler with an electric one. When screwing the screws in, it is important not to over tighten the screws because this can cause the handle to warp or crack.

The second step in fitting the new handle is to insert the spindle. This is the part that runs through the handle and operates the locking mechanism inside the window. It is crucial that it fits correctly as it will ensure that the window can be opened and closed securely.

There are a myriad of different kinds of uPVC handles. There are various kinds of window handles made of uPVC.

Espagnolette Handles - These are inline handles that can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is ideal for windows in difficult-to-access locations.

Tilt and turn handles - These are used to control the opening and closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

The majority of uPVC window frames are fitted with these. In the UK they are often called "Bay Windows".

If your uPVC window handle is damaged, it can be a major hassle. However, there is no need to replace the entire uPVC window because of a damaged handle. There are many easy steps that can be taken to fix and replace a damaged uPVC window handle.

You can repair your broken window handle quickly by identifying the type and determining the spindle. It is essential to be patient and prioritize security when working with windows or tools, however, this is a simple task. It could make the difference between a secure and safe home or a vulnerable open window! Bridgewater Glass is the place to go if you're in need of help or would like to speak to an expert regarding replacing your window handle. We have a group of experienced and knowledgeable experts who can help with any issues you might be having.