Replace Nissan Key Fob Batteries

If your Nissan keyfob does not respond to your commands, its battery may be dead. Fortunately, this is an easy fix that most people can do themselves.

You can find an alternative from a hardware store or the owner's guide for the specific model you own You'll need follow these instructions to change the battery.

Changing the Battery

The key fob of your Nissan model is fitted with a lithium battery built-in that will eventually lose its charge. The key fob battery can be replaced in just a few minutes. First, you'll need an CR2032 battery. It is a small coin-cell battery that is used in most key fobs. You can find it at a variety of convenience stores. You'll also require a pair of gloves (latex or non-latex) and a small flathead screwdriver to open the fob. Before you begin, make sure to check the owner's manual to find specific instructions and steps.

Flip the fob upside-down and look at the backside. You will see a small latch that you must let go by pulling it down. This will remove the mechanical key from the original position inside the fob.

Install the new battery and make sure it is properly positioned. Close the fob once the battery has been installed and then press the two sides of the fob together. Test your key fob after completing this step, by pressing the unlock button. You'll be able to use the many features of your Nissan if everything is working well. It's also a good idea to re-program your key fob following the change of the battery to ensure that it's operating properly.

Replacing the Transmitter

Your key fob is the "key" for many of your vehicle's most essential functions. It could be a big blow if it gets damaged or lost. A damaged or malfunctioning key fob will stop you from locking or starting your car.

It's a good idea to keep an extra key fob in your possession in case of emergency. Luckily, the procedure for replacing your Nissan key fob is fairly straightforward. You'll need a brand replace nissan key fob new battery and a small screwdriver for removing the old one However, the process of replacing it is very easy and should only take just a few minutes.

You'll require an oval Panasonic CR 2032 3V battery (you are likely to find them in multipacks for less than $5 USD). The battery is located in the back half and you'll need gently push the two halves in order to expose the battery. Make use of a flathead screwdriver or a small flathead to remove the clip that is on the top of the battery. Make sure you note the place of placement. Replace the battery, and assemble the key fob. Test it to make sure it works.

Like any electronic device, like all electronic devices, your Nissan Intelligent Key will eventually become worn out by regular usage and require to be replaced. To avoid this you should try to protect your key fob from magnetic fields, water as well as physical impacts, so be sure not to drop it or place too much pressure on it.

Replace the Key

If your Nissan key fob is lost and you are unable to use it to unlock your car or start it. This is a major issue for those who have to go to work in Detroit or go on errands around Dearborn.

The good news is, the battery inside your Nissan smart key isn't that difficult to replace. You can do it at home or at the dealership, and you'll typically get a battery for less than $5 at the hardware store.

Flip the fob back over and push the small catch on the back. This will open the mechanical emergency key. While you won't be in a position to use the emergency key to start your car but it will allow you to open the door.

Next look for a tiny slit on the top of the casing for the key fob. You can use a screwdriver for prying away the two parts of the key fob. Once you've access to the battery within, pull it out and make note of the position it is in. When you are in a position to reassemble your key fob, simply insert the new battery and then snap the two pieces of the case back together. Then, insert the mechanical key, and your Nissan smart key will operate as usual.

Other Issues

Many modern cars come with key fobs that allow you to lock them and open them without having a physical key. The key fob works as the transmitter to communicate with the computer system in the car.

If your Nissan key fob does not function after you replace the battery it could be due to a number of reasons why. One reason is that the new battery might not be seated properly inside the key fob. A reset of the key fob is another possibility. Luckily, this is an easy task that can be done at home using the right tools.

For instance, you'll require a screwdriver, preferably a flat head to unlock the key fob and remove the battery that was in there. Afterward, you can use an open-ended screwdriver the back of the key fob and insert the new battery. You'll also need to reprogramme your key fob in order to make it compatible with your vehicle.

You can easily program your Nissan key fob yourself as they are all user-programmable. It is usually done by inserting the key fob in the ignition two times within five minutes. If this fails it is possible to bring your key fob to an auto locksmith or dealer to get it programmed. Costs will vary based on the person you contact and the kind of vehicle you own.