Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double glazing repairs near me-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case you'll need locate some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional is able to repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is large, you might want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of the window, window repairs you can tighten screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. Often this is due to screws that have become loose over time. However, window repairs it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk can be applied. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's easy to change the hinges on a window, but it's easier if someone else helps you hold the frame.

Check that the uPVC hinges are open and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, creating an opening where the sash and frame meet. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it's possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be positioned on the top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a life span and they may reach an point at which it is more economical to replace them than repair them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.