Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to guard cars against key cloning or hacking is a discreet device which can be installed without causing damage to your vehicle. It prevents your vehicle from starting unless you enter the correct sequence of buttons inside your vehicle like the password of mobile phones.

Stop/Start

Ghost immobilisers prevent vehicles from being stolen by stopping the engine from starting until it receives the right PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit is directly connected to the ECU through the CAN databus in order to disable the vehicle. This system is similar to the one car manufacturers have been using in their vehicles for a long time, however, the thief isn't able to add a key or use key relay technology to bypass it, as they could with factory-installed systems.

Ghost is compatible with any vehicle with an engine, including motorhomes, cars, vans, caravans, and bikes. The same system can also be used on electric vehicles. It is an excellent alternative to steering wheel locks and wheel clamps that can be installed with a minimum of effort.

When the Ghost is activated, it will block all buttons in your car and stop the ignition from being started until a PIN code has been entered first. This can be done via the Android or Apple mobile apps or by entering the code using your key fob. If the incorrect code is entered, the app will show an indicator light. The Ghost will then not allow the vehicle be started again. This is a great deterrent. if the vehicle can't be started, the burglar will move on to another target.

The Ghost is a weatherproof, small device that can be tucked away in the most difficult to access areas of your vehicle. It is incredibly easy to install with an average of 20-30 minutes for each vehicle. It is also easy to remove should you choose to move your vehicle around or return it to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognised by some insurers. It also comes with a secure emergency Pin Code override and features a Service/Valet mode that can be activated with a button on the app or with your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that can be removed, are concealed in the car. They are near impossible to bypass or hack and even if discovered, a burglar will not be able to start the engine. This is because ghost immobilisers prevent key blocking, signal jamming, and device spoofing - techniques that are commonly used by thieves to gain access to vehicles with standard immobilisers.

An immobiliser functions by sending an instruction to the ECU (electronic control unit). If a wrong code is received and the vehicle doesn't start because the engine will not fire up. It is possible to disable a ghost immobiliser by using a software tool, but it would be very difficult and time consuming to accomplish this. Only an authorised installer can install and use the software.

The Ghost immobiliser, which is a tiny system, is hidden within the wiring loom of the vehicle. It is inaccessible to the naked eye once installed. It doesn't show up on diagnostic systems. There are no LED indicators, and it does not communicate with the engine via the OBD port. It communicates in silence via the CAN data loop.

The system will prevent the vehicle from starting unless it is given a specific PIN code sequence. This code is entered using buttons on the steering wheels and door panels as well as the the centre console. This is a safer way to protect your car since it doesn't require keys or a remote control.

In addition to this ghost Immobiliser Installer (easy.ksubest.Com) offers the option of a service mode that can be activated through the application on your mobile phone. This allows you to give your keys to a person for valet parking or servicing without having to enter the disarm sequence.

No matter if your Ghost is in service mode or not, you should never attempt to remove the system by yourself since it could impact your engine and cause damage. It is recommended to speak with an TASSA certified installer who can remove the system safely and properly. Our most recent GHOST II immobilisers also include an exclusive QR fingerprint sticker that is hidden in various locations of your vehicle. they are linked to our global security register - in the event the system is removed and sold on the black market this will link it back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a extremely useful anti-hijack feature. This system is a smart key that protects your car from theft. When the ignition switch is turned to on and the vehicle remains stationary for a period of 30 seconds then the Ghost system will automatically stop the engine and turn on the warning lights on. This gives the driver and passengers time to press the hidden security button before the system can be activated.

Contrary to many other systems that simply stop the engine when the ignition is switched on and on, the Ghost system has a unique controller and timer unit that will shut off the valve for cutting off fuel 14 if it is activated after the set time, even when the ignition is in operation! This delay period must be sufficient to allow the person who was hijacked to drive away and stay a safe distance from the vehicle that is stalled before the system is activated.

The ghost 11 immobiliser offers added security that prevents common hacking methods used to gain entry into modern cars, such as relay attacks and key range extending. This is because the Ghost system is completely silent and does not emit any signals that could be picked up by thieves using code grabbing or RF scanning technology.

The Ghost system also features the option of a Service/Valet mode that allows your vehicle to be started temporarily and driven without the requirement of PIN codes. This is ideal if you park your car and only need to leave it for a brief time for a few minutes, like to open the garage door or put groceries in the boot. The system will end the service mode according to speed and time, or via a simple PIN code input process. This gives you complete assurance that only you can drive your vehicle!

Keyless Entry

Many customers are seeking additional security measures because of the rising trend of car thefts using contactless technology. This is especially true for those who invested time and money in customizing their car or own expensive cars. Immobilisers with add-ons can be an effective way to deter this type of theft as they can prevent your vehicle from starting until proper pin code is entered, along with your key fob.

Immobilisers are designed for various vehicle circuits, including those that control starter motors and fuel pumps. They can also shut off the car alarm in order to attract attention and ward off potential thieves.

These devices communicate directly with the engine control unit using the CAN data network and hinder thieves from gaining access to it by installing a new ECU or using key programmers. The immobilisers can be installed discreetly in your vehicle, leaving no traces and are completely undetectable by the tools that hi-tech thieves use.

The Ghost immobiliser is unlike other systems that require the driver to wear an app or tag. Instead, you can select your own pin sequence by pressing the pattern on your steering, door panel, or centre console. The pin can be changed as frequently as you like, meaning it is as secure as a credit card and can be even more difficult to break because it requires up to 20 press.

Ghost also offers the Valet/Service mode, which allows you to deactivate the system when your vehicle will be handed over for valet parking or services, enabling it to operate within predetermined parameters such as a 30mph speed limit, so you don't have to worry about your car being driven in reckless manner. It can then be reactivated by using the original key or corresponding entry code.

This makes it the most effective and secure aftermarket CAN immobiliser available on the market. It is insurance approved by Thatcham as an accessory to your vehicle when installed by one of our certified installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels as well as an ISR contact card with your unique QR code as well as a secure emergency code which can be kept in the purse or wallet of your vehicle.