Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If windows with double glazing repairs panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door repair is large, you might want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they are susceptible to a range of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your Window Repair to check the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close the window and then perform an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and Window repair restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be hinges at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. Sending us a picture through our website can often solve the issue. We are more than happy to offer advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, which can cause gaps where the sash meets frame. They can be fixed by giving them a thorough clean, however if they are beyond repair it could be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it is possible to just give them a good clean, window repair but in some cases it might be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.