Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. However when you have double glazed window repairs pane windows that are secured by internal beading, uPVC window repairs it'll be more difficult to remove the existing panes and install new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap between the window and the door is large, you might prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to open the windows to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or upvc window repairs counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're happy with the fit, tighten the screws until they stay in place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

It is a fairly easy fix that can be done by any DIY expert. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk can be put on. It is important to remember that when it is about upvc window repairs - my company, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze it could be hinges that are at the fault. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like all mechanical parts hinges are prone to be damaged over time. Changing a window hinge is essentially a simple process but it can be easier when you have a person to assist in holding the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges due to wear and tear may become displaced, which causes an opening to appear between the sash and the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it may be possible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance immediately.