Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. However when you have double-pane windows that are anchored by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to find some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the window and the door is substantial, you may need to consider security screens that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems, including sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window to access the frame. After that, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC Window Repair handle yourself. First, you'll need to shut the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may require removal before a new layer is applied. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are difficult to open, or slack and open in a breeze, it may be hinges that are at the fault. These are easily repaired by any skilled DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, may become displaced, which causes a gap to form where the sash joins the frame. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The second is the interlock, which is on the hinge side of the window, may also become misaligned, again it's possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, window repair and also reduce the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them rather than repair them. If you have any problems with your upvc window you should consult a professional as soon as you can.