Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and Window Repairs the new window will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is significant, you may want to use security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can access the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window repairs watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer is applied. It is essential to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze it could be hinges at fault. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It is very easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the upvc window repair hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website will often resolve the problem. We are always happy to offer suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear between the sash and the frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it is possible to give them a good clean, but in some cases it might be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be positioned on the windowsill on top. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.