Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers that will help the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to access the frame. With the screwdriver, you'll be able to take off the hinges at the top and window Repairs croydon bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's relatively easy to repair a loose uPVC handle. The first step is to close the Window Repairs Dover and then perform an experiment fit. The corners of the sash must align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is essentially a very simple process, but it's simpler when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge. This shows which way the Window repairs Croydon should open.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to offer assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, creating gaps where the sash meets frame. These can be easily repaired by giving them good clean, Window repairs croydon but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may also become disaligned. This happens on the hinge side and could require to be cleaned. In certain instances it is possible to replace them.

These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more efficient to replace them than repair them. If you encounter any issues with your window made of upvc you should consult an expert as soon as you can.